Features:
Digital Signal Processing Version
Downward firing 12" Woofer
Sealed Aperiodic Vent Cabinet Design
750 watt Class D amplifier
24bit/96k Audio Performance
Burr Brown Converters
8 Band Fully Parametric Eq On All Channels
HPF & LPF Options
Optional Limiter Protection
Pre-set Storage/recall
Pre-sets for all Unity Audio models inc Avalanche Bypass
2 XLR inputs and 2 XLR outputs.
1 x Neutrik CAT5 sealed Ethernet connector for DSP software control via Mac/PC • 430 mm x 430mm x 540 mm high with isolating rubber feet
Semi-gloss black cabinet paint finish
33Kg
Intended to expand Boulder into a 4 way free standing or flush mounted system. Fitted with 1250 watt Class D amplifier & DSP input processor. Or alternative sub-woofer option to the Avalanche MK-II DSP.
Features:
Digital Signal Processing
24bit/96k audio performance
Burr Brown converters
1 x 12"/300mm sub-woofer with high flux double Ferrite magnets. 5.1′′ HexatechTM aluminium voice coil
Sealed Baltic Birch 18mm (.75”) plywood cabinet
Corian 30mm (1.2”) front baffle
1250 watt Class D amplifier
1 x XLR analogue input
1 x XLR analogue AUX output
1 x Neutrik CAT5 sealed Ethernet connector for DSP software
520 mm D x 386mm W x 614mm H
Features:
Active 3 way monitor
2 x 8.5"/ 220mm Crystal Membrane Woofer
Coaxial 5" Mid Range & 50kHz folded ribbon tweeter
Sealed Baltic Birch 18mm Plywood Cabinet
Corian 30mm baffle
1 x XLR analogue input
2x Custom discrete Class A/B Amplifiers & power supply for Coaxial 5" Mid/HF • 2x 300 watt Class D amplifiers & power
supply for 2 x 8.5" woofers
390mm D x 268mm W x 614mm H
Semi-gloss black cabinet paint finish
28Kg each
Features:
Active 3 way monitor
2 x 8.5"/ 220mm Crystal Membrane Woofer
Coaxial 5" Mid Range & 50kHz folded ribbon tweeter
Sealed Baltic Birch 18mm Plywood Cabinet
Corian 30mm baffle
1 x XLR analogue input
2x Custom discrete Class A/B Amplifiers & power supply for Coaxial 5" Mid/HF • 2x 300 watt Class D amplifiers & power
supply for 2 x 8.5" woofers
390mm D x 268mm W x 614mm H
Semi-gloss black cabinet paint finish
28Kg each
Digital Signal Processing version • 24bit/96k audio performance
Burr Brown converters
1 x XLR analogue input
1 x XLR analogue AUX output to feed sub-woofer, room zones etc
1 x Neutrik CAT5 sealed Ethernet connector for DSP software control via Mac/PC
8 band fully parametric EQ on all channels
HPF & LPF options
Optional limiter protection
Phase & variable delay/phase on all channels • 30 x Pre-sets for storage/recall
Unity Audio Factory pre-sets included
Features
Active 3 Way Monitor
8" / 200 mm Woofer,
Coaxial 5" Mid range driver & 50kHz
folded ribbon tweeter
Sealed Baltic Birch 18mm Plywood Cabinet • Corian 18mm baffle. Black/fleck finish
XLR analogue input
2 x 100 Watt Discrete A/B Amplifier &
power supply by Esoteric Audio Research for
Coaxial 5" Mid/HF
1 x 300 Watt Class D amplifier & power
supply for 8" woofer
354mm deep x 268mm wide x 406 mm high • Semi-gloss black cabinet paint finish
17.5 Kg each
Features
Active 3 Way Monitor
8" / 200 mm Woofer,
Coaxial 5" Mid range driver & 50kHz
folded ribbon tweeter
Sealed Baltic Birch 18mm Plywood Cabinet • Corian 18mm baffle. Black/fleck finish
XLR analogue input
2 x 100 Watt Discrete A/B Amplifier &
power supply by Esoteric Audio Research for
Coaxial 5" Mid/HF
1 x 300 Watt Class D amplifier & power
supply for 8" woofer
354mm deep x 268mm wide x 406 mm high • Semi-gloss black cabinet paint finish
17.5 Kg each
Digital Signal Processing version • 24bit/96k audio performance
Burr Brown converters
1 x XLR analogue input
1 x XLR analogue AUX output to feed sub-woofer, room zones etc • 1 x Neutrik CAT5 sealed Ethernet connector
for DSP software control via Mac/PC
8 band fully parametric EQ on all channels
HPF & LPF options
Optional limiter protection
Phase & variable delay/phase on all channels • 30 x Pre-sets for storage/recall
Unity Audio Factory pre-sets included
Unity Audio launched their new Mini-Rock 2 way active monitor at this year's 2018 NAMM show. As the name implies, this new addition represents the smallest model in the company's professional active monitor range to date measuring 279mm high , 184 mm wide, 256 mm deep, ( 10.98" high x 7.24" wide x 10.07" deep ). The cabinet is of course a sealed design like all the models in the Unity Audio range in order to accurately reproduce low frequencies with superior transient response and without any phase/timing anomalies associated with other designs. The Mini-Rock is also the first monitor in the range with the exception of the Avalanche sub-woofer that uses a split dual-chamber cabinet with Aperiodic Vent. This delivers all the benefits of a sealed cabinet such as zero port noise and tight fast accurate bass reproduction. It also significantly increases the bass response available from a smaller cabinet design. The Mini-Rock cabinet will also have mounting points for third party yokes and brackets for the installation market. The Mini-Rock shares the same 50kHz folded ribbon tweeter that is used in the larger Rock and the 3 way Boulder * but a new crystal membrane woofer measuring 150mm ( 5-3/4" ) has been selected. This eye-catching surface of the crystal membrane is more than just an attractive design feature. The crystal-shaped inverse aluminium dome is joined to a paper cone in a special gluing process to result in the desired sandwich construction. The crystal cone aluminium-foil stamping stiffens the aluminium dome, diminishing resonances and minimizing coloration, while improving power handling and dynamics. The voice coil design of the woofer results in an expanded range of the respective drivers by nearly an octave. The Mini-Rock uses two 180 watt Class D amplifiers one per drive unit which also includes DC protection. A custom input/crossover has been designed providing a rear panel volume control. The Class D power supply provides switchable 115v-230v operation.
Unity Audio launched their new Mini-Rock 2 way active monitor at this year's 2018 NAMM show. As the name implies, this new addition represents the smallest model in the company's professional active monitor range to date measuring 279mm high , 184 mm wide, 256 mm deep, ( 10.98" high x 7.24" wide x 10.07" deep ). The cabinet is of course a sealed design like all the models in the Unity Audio range in order to accurately reproduce low frequencies with superior transient response and without any phase/timing anomalies associated with other designs. The Mini-Rock is also the first monitor in the range with the exception of the Avalanche sub-woofer that uses a split dual-chamber cabinet with Aperiodic Vent. This delivers all the benefits of a sealed cabinet such as zero port noise and tight fast accurate bass reproduction. It also significantly increases the bass response available from a smaller cabinet design. The Mini-Rock cabinet will also have mounting points for third party yokes and brackets for the installation market. The Mini-Rock shares the same 50kHz folded ribbon tweeter that is used in the larger Rock and the 3 way Boulder * but a new crystal membrane woofer measuring 150mm ( 5-3/4" ) has been selected. This eye-catching surface of the crystal membrane is more than just an attractive design feature. The crystal-shaped inverse aluminium dome is joined to a paper cone in a special gluing process to result in the desired sandwich construction. The crystal cone aluminium-foil stamping stiffens the aluminium dome, diminishing resonances and minimizing coloration, while improving power handling and dynamics. The voice coil design of the woofer results in an expanded range of the respective drivers by nearly an octave. The Mini-Rock uses two 180 watt Class D amplifiers one per drive unit which also includes DC protection. A custom input/crossover has been designed providing a rear panel volume control. The Class D power supply provides switchable 115v-230v operation.
Features:
Digital Signal Processing version
Same basic specification as Mini-Rock
24bit/96k audio performance
Burr Brown converters
8 band fully parametric EQ on all channels
HPF & LPF options
Optional limiter protection
Preset storage/recall
Avalanche sub-woofer presets & bypass included
Features:
Active 2 Way Monitor
7" / 180mm Crystal Membrane Woofer,
50kHz Folded Ribbon Tweeter.
Sealed Baltic Birch 12mm Plywood Cabinet • Corian 12mm baffle, black/fleck finish
1 x XLR analogue input
1 x RCA/Phono input
2x 180 watt Class D amplifiers
290mm deep x 220mm wide x 325mm high • Semi-gloss black cabinet paint finish
9 Kg each
Features:
Active 2 Way Monitor
7" / 180mm Crystal Membrane Woofer,
50kHz Folded Ribbon Tweeter.
Sealed Baltic Birch 12mm Plywood Cabinet • Corian 12mm baffle, black/fleck finish
1 x XLR analogue input
1 x RCA/Phono input
2x 180 watt Class D amplifiers
290mm deep x 220mm wide x 325mm high • Semi-gloss black cabinet paint finish
9 Kg each
Digital Signal Processing version
24bit/96k audio performance
Burr Brown converters
1 x XLR analogue input
1 x XLR analogue AUX output to feed
sub-woofer, room zones etc
1 x Neutrik CAT5 sealed Ethernet connector
for DSP software control via Mac/PC
8 band fully parametric EQ on all channels
HPF & LPF options
Optional limiter protection
Phase & variable delay/phase on all channels • 30 x Pre-sets for storage/recall
Unity Audio Factory pre-sets included
Professional adjustable speaker stands
Available in 3, 2 and single leg configurations.
Why the Monolith?
We designed and built our own monitor stands because we felt that other current speaker stand brands just were not up to the job for professional applications. The principle behind a good stand is to provide a solid base for the speaker so that energy is not lost through unnecessary movement; so that the speakers energy is projected forward to the listener! Also if your control room has a resonant floor, The Monolith decouples the speaker from the floor, again reduced energy loss.
How does a speaker stand improve the sound?
By using our stands, bass response is dramatically improved with extended lower end performance in conjunction with tighter, better defined mid range.
Construction
Heavy gauge 5mm steel stock finished in a black powder coat. Top and bottom plates are 300mm x 300mm but custom sizes are available. Three vertical hollow legs allow to be sand filled to add additional mass. The height is adjustable as each leg is drilled with a number of equally spaced holes and locking pins fix the legs to the desired height. Both top and bottom plates are drilled and tapped with M8 threads to accept heavy duty M8 knurled spikes to mount the speaker to the stand and isolate the stand from the floor if required. "Very classy! Love 'em!" - Paul Cartledge, Yellow Boat Music
Dimensions
Top and bottom plate = 300mm x 300mm (custom sizes can be accommodated) Minimum height = 830mm Maximum extended height =1380mm Weight = 30kg approx
Some Monolith users
Miloco Studios
Air Studios
Dave Gilmore
Stephen Lipson
Mute Records
Professional adjustable speaker stands
Available in 3, 2 and single leg configurations.
Why the Monolith?
We designed and built our own monitor stands because we felt that other current speaker stand brands just were not up to the job for professional applications. The principle behind a good stand is to provide a solid base for the speaker so that energy is not lost through unnecessary movement; so that the speakers energy is projected forward to the listener! Also if your control room has a resonant floor, The Monolith decouples the speaker from the floor, again reduced energy loss.
How does a speaker stand improve the sound?
By using our stands, bass response is dramatically improved with extended lower end performance in conjunction with tighter, better defined mid range.
Construction
Heavy gauge 5mm steel stock finished in a black powder coat. Top and bottom plates are 300mm x 300mm but custom sizes are available. Three vertical hollow legs allow to be sand filled to add additional mass. The height is adjustable as each leg is drilled with a number of equally spaced holes and locking pins fix the legs to the desired height. Both top and bottom plates are drilled and tapped with M8 threads to accept heavy duty M8 knurled spikes to mount the speaker to the stand and isolate the stand from the floor if required. "Very classy! Love 'em!" - Paul Cartledge, Yellow Boat Music
Dimensions
Top and bottom plate = 300mm x 300mm (custom sizes can be accommodated) Minimum height = 830mm Maximum extended height =1380mm Weight = 30kg approx
Some Monolith users
Miloco Studios
Air Studios
Dave Gilmore
Stephen Lipson
Mute Records
€239.00*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...