Shure 520 DXWith its signature green and chrome die-cast casing, the 520DX "Green Bullet" holds a spot in history as the definitive blues harp voice.The 520DX features a volume control knob at the base of the microphone that allows users to make adjustments to suit their needs during live performance. An attached cable with a standard 1/4-inch plug allows the microphone to be connected to a high-impedance device. Contoured to fit perfectly between harmonica and hands, it can also be used for distinct, lo-fi vocals.520DX includes attached cableFeatures: Volume control knob allows users to adjust the volume to fit each musical situation Rugged, dynamic cartridge with improved response High-impedance, omnidirectional Supplied with 1/4 inch connector Frequency response 100 to 5,000 HzTechnical Specifications:Type:Dynamic Frequency Response:100 to 5,000 Hz Polar Pattern:Omnidirectional Impedance:High, unbalanced Load Impedance Range:Minimum: 100 kilohms Output Level (at 1,000 Hz):Open Circuit Voltage -38.0 dBV/Pa (13 mV)* Polarity:Positive sound pressure on diaphragm produces positive voltage on tip with respect to sleeve (ground) of microphone output phone plug connector Cable:6.1 m (20 ft) two conductor shielded with standard 1/4-inch phone plug attached (supplied wired for high-impedance, unbalanced connection) Case:Green and chrome finished die casting Dimensions:63 mm (2.5 in) max diameter, 82.6 mm (3 1/4 in) long Net Weight (with cable):737 grams (26 oz)
Shure 545SDLC Cardioid Handheld Dynamic PA System MicrophoneThe UNlDYNE® III Model 545SD is a dual-impedance, unidirectional, dynamic microphone. Shipped connected for low-impedance operation, it features a silent magnetic reed on/off switch.The UNlDYNE III is a favorite for instrument pickup and recording, and can be used on lecterns for public address systems such as those used in political conventions and legislatures, convention halls, hotels, public auditoriums, stadiums, schools, and churches.• Exceptionally uniform cardioid pattern minimizes feedback in PA applications• Selectable dual-impedance operation• Silent magnetic reed on/off switch with lock-on option• Lavalier version available for use as a lectern microphone with A25D adapter, or as handheld microphone For more information, please visit this products webpage.
Shure 55SH SERIE IIThe 55SH Series II microphone has a cardioid (unidirectional) polar pickup pattern that minimizes sound pickup from the rear of the microphone. This allows the Model 55SH Series II to be used in close proximity to loudspeakers without creating feedback problems, and it can perform under adverse acoustic conditions where omnidirectional microphones cannot. 55SH Series II: Includes Swivel Stand Mount, On-Off Switch. Cable not included.Features: Classic appearance, modern performance Frequency response tailored for speech, vocals and instrumental music Cardioid directional pattern for optimum performance in adverse acoustic environments Shock-mounted cartridge minimizes stand-transmitted noise, ensures quiet operation Rugged die cast casing for reliability under rigorous conditions Self-tensioning swivel mount, permits tilting through 45 degrees forward and 80 degrees backwardTechnical Specifications:Type:Dynamic Frequency Response:50 to 15,000 Hz Polar Pattern:Cardioid (unidirectional), uniform with frequency, symmetrical about axis Impedance:Microphone rating impedance is 150 ohms (270 ohms actual) for connection to microphone inputs rated at 75 to 300 ohms Sensitivity (at 1,000 Hz):Open Circuit Voltage: -58.0 dBV/Pa (1.3 mV), 1 Pascal=94 dB SPL Polarity:Positive pressure on the diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector Switch:Built-in On/Off switch, integral part of swivel mount, connector Three pin professional type, designed to mate with Cannon XL series, Switchcraft A3 (Q.G.) series, or equivalent Case:Chrome-plated die casting Net Weight:624 grams (22 oz)
Shure 565SD LC Cardioid Handheld Dynamic MicrophoneThe UNISPHERE ® I 565 Series microphones are dual-impedance, unidirectional dynamic microphones with a strong, wire-mesh, spherical front grille that contains a highly effective wind and "pop" filter.Shipped connected for low-impedance operation, 565 Series microphones provide excellent vocal or speech reproduction on lecterns and stages, and are a popular choice for use in public auditoriums, churches, convention halls, and schools.• Versatile, high-quality microphone with sound characteristics similar to the SM58®• Selectable dual-impedance operation• Silent magnetic reed on/off switch with lock-on option For more information, please visit this products webpage.
The ANI22 device can bring up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control. Available in XLR and block connector.
More flexibility for every kind of application where it is required to get analog audio onto and from a Dante network: The ANI22 Audio Network Interface complements the existing ANI4IN and ANI4OUT products, and is available with XLR and block connectors. It brings up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control.
Features:
Converts up to 2 mic/line analog signals onto a Dante Network
Converts up to 2 Dante digital audio signals to line/mic analog signals, ANI22BLOCK: Analog audio block connectors (2 in, 2 out); ANI22XLR: Analog audio XLR connectors (2 in, 2 out)
Power-over-Ethernet (PoE) eliminates need for outboard power supply
Compact form factor is easy to mount without equipment rack
The ANI22 device can bring up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control. Available in XLR and block connector.
More flexibility for every kind of application where it is required to get analog audio onto and from a Dante network: The ANI22 Audio Network Interface complements the existing ANI4IN and ANI4OUT products, and is available with XLR and block connectors. It brings up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control.
Features:
Converts up to 2 mic/line analog signals onto a Dante Network
Converts up to 2 Dante digital audio signals to line/mic analog signals, ANI22BLOCK: Analog audio block connectors (2 in, 2 out); ANI22XLR: Analog audio XLR connectors (2 in, 2 out)
Power-over-Ethernet (PoE) eliminates need for outboard power supply
Compact form factor is easy to mount without equipment rack
The ANIUSB-MATRIX USB Audio Network Interface complements the existing ANI4IN, ANI4OUT, and ANI22 products. It offers the ideal performance, connectivity, and affordability for audio/video conferencing installations in small and medium-size meeting rooms when a premium microphone solution is desired, and acoustic echo cancellation of an A/V conferencing codec will be used.
The ANIUSB-MATRIX connects 4 Microflex Advance or Microflex Wireless microphone channels via Dante (4 in / 2 out), provides analog connectivity (1 block in / 1 block out) to a room audio/video conferencing system or a PC-based A/V conferencing application via USB (1 in/out).
An internal matrix mixer offers flexible routing, allowing users to route any input to any output. A 4-band parametric EQ filter is also available on the analog and USB outputs.
Features:
Connects 4 Dante audio inputs and 1 analog input to a AV conferencing system or a PC-based videoconferencing application
Flexible signal routing and connectivity: analog audio (1 block in / 1 block out) to room AV conferencing system; USB (1 in/out) to connect to laptop or room PC
Power-over-Ethernet (PoE) eliminates the need for an outboard power supply
Compact form factor is easy to mount without equipment rack
The Shure Beta 181/BI Compact Side-Address Instrument Microphone is a durable, small diaphragm, electret condenser microphone with an interchangeable capsule design. The Beta 181/BI ships with a bi-directional (figure 8) capsule which yields a matched pickup on either side of the diaphragm. The microphone features a wide frequency response and rugged build, ideal for the stage and recording studio. Its high SPL handling makes it well suited for capturing amplifier cabinets, drums, percussion, piano and more.
BETA 181/BI (bi-directional) for mono drum overhead, dual instrument sound source applications, Blumlein stereo technique (pair of Beta 181/BI)
Interchangeable polar pattern capsules attach to a compact preamplifier with integrated XLR connections for the ultimate in low-profile application flexibility (Each Beta 181 ships with one polar pattern capsule and one XLR preamplifier. Capsules available separately for custom flexibility.)
Precision-engineered, compact side-address design features innovative locking ring to provide secure connection between capsule and preamplifier
Frequency response tailored for wide dynamic range applications for use in high SPL environments
Furnished with stand adapter, windscreen and carrying case (carrying case will securely protect up to four polar pattern capsules)
Specifications
Transducer Electret Condenser
Polar Pattern Bi-directional
Frequency Response 20Hz to 20kHz
Dynamic Range (Typical) 2500 Ω load: 133.5dB
1000 Ω load: 130.5dB
Signal-to-Noise Ratio 71.0dB
Maximum Input Sound Level 2500 Ω load: 156dB
1000 Ω load: 153.5dB
Power Requirements 11-52 V DC phantom power (IEC-61938)
2.4 mA, maximum
Output Impedance 110 Ohms
Output Connectors 3-pin XLR
Dimensions 4.90 x 1.36" (124.46 x 34.54mm)
Diameter: 0.80" (20.32mm)
Weight 145g (5.1 oz)
The Shure Beta 181/C Compact Side-Address Instrument Microphone is a durable, small diaphragm, electret condenser microphone with an interchangeable capsule design. The Beta 181/C ships with a cardioid capsule which minimizes off-axis feedback and improves signal-to-noise ratio while still allowing for flexible positioning. The microphone features a wide frequency response and rugged build, ideal for the stage and recording studio. Its high SPL handling makes it well suited for capturing amplifier cabinets, drums, percussion, piano and more.
BETA 181/C (cardioid) for drum overhead, piano, acoustic instrument applications, M/S stereo technique (paired with Beta 181/BI)
Interchangeable polar pattern capsules attach to a compact preamplifier with integrated XLR connections for the ultimate in low-profile application flexibility (Each Beta 181 ships with one polar pattern capsule and one XLR preamplifier. Capsules available separately for custom flexibility.)
Precision-engineered, compact side-address design features innovative locking ring to provide secure connection between capsule and preamplifier
Frequency response tailored for wide dynamic range applications for use in high SPL environments
Furnished with stand adapter, windscreen and carrying case (carrying case will securely protect up to four polar pattern capsules)
Specifications
Transducer Electret Condenser
Polar Pattern Cardioid
Frequency Response 20Hz to 20kHz
Dynamic Range (Typical) 2500 Ω load: 131dB
1000 Ω load: 128.5dB
Signal-to-Noise Ratio 73.5dB
Maximum Input Sound Level 2500 Ω load: 151.5dB
1000 Ω load: 149dB
Power Requirements 11-52 V DC phantom power (IEC-61938)
2.4 mA, maximum
Output Impedance 110 Ohms
Output Connectors 3-pin XLR
Dimensions 4.90 x 1.36" (124.46 x 34.54mm)
Diameter: 0.80" (20.32mm)
Weight 145g (5.1 oz)
The Shure Beta 181/O Compact Side-Address Instrument Microphone is a durable, small diaphragm, electret condenser microphone with an interchangeable capsule design. The Beta 181/O ships with an omnidirectional capsule for the widest pick up area and most flexible placement possibilities. The microphone features a wide frequency response and rugged build, ideal for the stage and recording studio. Its high SPL handling make it well suited for capturing amplifier cabinets, drums, percussion, piano and more.
BETA 181/O (omnidirectional) for ambient/room, instrument ensemble applications
Interchangeable polar pattern capsules attach to a compact preamplifier with integrated XLR connections for the ultimate in low-profile application flexibility (Each Beta 181 ships with one polar pattern capsule and one XLR preamplifier. Capsules available separately for custom flexibility.)
Precision-engineered, compact side-address design features innovative locking ring to provide secure connection between capsule and preamplifier
Frequency response tailored for wide dynamic range applications for use in high SPL environments
Furnished with stand adapter, windscreen and carrying case (carrying case will securely protect up to four polar pattern capsules)
Specifications
Transducer Electret Condenser
Polar Pattern Omnidirectional
Frequency Response 20Hz to 20kHz
Dynamic Range (Typical) 2500 Ω load: 133.5dB
1000 Ω load: 130.5dB
Signal-to-Noise Ratio 70.5dB
Maximum Input Sound Level 2500 Ω load: 157dB
1000 Ω load: 154dB
Power Requirements 11-52 V DC phantom power (IEC-61938)
2.4 mA, maximum
Output Impedance 110 Ohms
Output Connectors 3-pin XLR
Dimensions 4.90 x 1.36" (124.46 x 34.54mm)
Diameter: 0.80" (20.32mm)
Weight 145g (5.1 oz)
The Shure Beta 181/S Compact Side-Address Instrument Microphone is a durable, small diaphragm, electret condenser microphone with an interchangeable capsule design. The Beta 181/S ships with a supercardioid capsule for the most effective control against off-axis noise, ambiance and feedback. The microphone features a wide frequency response and rugged build, ideal for the stage and recording studio. Its high SPL handling make it well suited for capturing amplifier cabinets, drums, percussion, piano and more.
BETA 181/S (supercardioid) for snare drum, acoustic instrument, close-miking applications
Interchangeable polar pattern capsules attach to a compact preamplifier with integrated XLR connections for the ultimate in low-profile application flexibility (Each Beta 181 ships with one polar pattern capsule and one XLR preamplifier. Capsules available separately for custom flexibility.)
Precision-engineered, compact side-address design features innovative locking ring to provide secure connection between capsule and preamplifier
Frequency response tailored for wide dynamic range applications for use in high SPL environments
Furnished with stand adapter, windscreen and carrying case (carrying case will securely protect up to four polar pattern capsules)
Specifications
Transducer Electret Condenser
Polar Pattern Supercardioid
Frequency Response 20Hz to 20kHz
Dynamic Range (Typical) 2500 Ω load: 132dB
1000 Ω load: 129.5dB
Signal-to-Noise Ratio 71.5dB
Max Input Sound Level (SPL) 2500 Ω load: 154.5dB
1000 Ω load: 152dB
Power Requirements 11-52 V DC phantom power (IEC-61938)
2.4 mA, maximum
Output Impedance 110 Ohms
Output Connectors 3-pin XLR
Dimensions 4.90 x 1.36" (124.46 x 34.54mm)
Diameter: 0.80" (20.32mm)
Weight 145g (5.1 oz)
Shure Beta 27 Supercardioid Side-Address Condenser MicrophoneThe Shure Beta 27 Supercardioid Side-Address Condenser Microphone features a large gold-layered diaphragm, and a natural frequency response well suited for capturing vocals and instruments in recording and live sound applications. The versatile Beta 27's supercardioid polar pattern is most effective in minimizing off-axis noise and feedback. A 3-position low frequency roll off filter switch minimizes low frequency noise, and a -15dB pad switch maximizes headroom while capturing transient peaks.• Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources• Tailored for superior transient response from a low-mass, 1" externally-biased, ultra-thin 24 Karat gold-layered Mylar diaphragm• Flat, neutral frequency response for natural reproduction on stage or in the studio• 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low frequency• -15dB switchable attenuator handles extremely high SPLs with ease• Premium electronic components and gold-plated internal and external connectors• Internal pop filter with three separate mesh layers reduces wind and breath noise For more information, please visit this products webpage.
Shure BETA 52AThe Shure Beta 52®A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch", and delivers studio quality sound even at extremely high sound pressure levels. The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.Features: Frequency response shaped specifically for kick drums and bass instruments Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum Studio quality performance, even at extremely high sound pressure levels Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise Hardened steel mesh grille that resists wear and abuse Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration Neodymium magnet for high signal–to–noise ratio output Low sensitivity to varying load impedance Legendary Shure quality and reliabilityTechnical Specifications:Type:Dynamic (moving coil) Frequency Response:20 to 10,000 HzPolar Pattern:Supercardioid, rotationally symmetrical about microphone axis Output Level (at 1,000 Hz):Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)Impedance:Rated impedance is 150 ohms (45 ohms actual) for connection to microphone inputs rated low Z Phasing:Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Maximum SPL:174 dB at 1000 Hz (calculated) Connector:Three-pin professional audio connector (male XLR type) Case:Silver blue enamel-painted die cast metal with hardened, matte-finished steel grille Adjustable, Locking Stand Adapter:Integral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 thread Net Weight:605 grams (21.6 oz)
Shure BETA 53The BETA 53 is a fully adjustable omnidirectional condenser headworn vocal microphone, designed for applications where unconspicuous appearance and incredible sound quality are required. Its lightweight, adjustable, modular headband, flexible wireframe and soft earpieces provide a comfortable fit while still allowing the Beta 53 to be positioned as close to the left or right corner of the mouth as possible, assuring maximum voice pickup. The BETA 53 microphone features an extended frequency response and high SPL handling ability. It is uniquely designed to provide the sound quality and performance consistency required for environments such as professional theater, event production, trade shows and seminars. A wireless version is available as the WBH53.Features: Comfortable, latex-free earforms that hide behind the ears Thin, non-reflective wireframe that is easily hidden underneath hair Ultra-thin detachable microphone boom mount for right or left positioning Interchangeable frequency response caps (mild or high, two pieces each) Two foam windscreens included Clothing clip for securing cable Corrosion resistant Easy to clean Durable carrying case for protective storage Available with either TA4F connectors or tinned leads (no connector) for full wireless system compatibility Includes In-Line PreamplifierTechnical Specifications:Type:Condenser (electret bias) Frequency Response:20Hz to 20KHz Polar Pattern:Omnidirectional Output Noise (equivalent dBSPL, A-weighted):39.0 dB typical; 42.0 dB maximum Signal-to-Noise Ratio:55 dB at 94 dB SPL Recommended Minimum Input Impedance:>1 kilohm Preamp Output Impedance:136 ohms Output Level, open circuit, ref. 1v/Pa at 1 kHz:-50.0 +/- 3.0dB 3.16mV Maximum Sound Pressure Level:147 dBSPL at 1% THD/1 kilohm load Dynamic Range:108 dB (max. SPL with 1k load, minus typical A-wt. noise) Current Drain:4.6 mA (preamp and microphone) Output Polarity:Positive pressure on the diaphragm produces a positive voltage at: Pin 2 relative to pin 3 at the output connector of the preamp Power Requirements:Phantom power; 11 to 52 Vdc positive on pins 2 and 3, return on pin 1 (ground) Net Weight:135.35 g (4.75 oz.) microphone and in-line preamp Cable:1.5 m (5 ft.), small-diameter, shielded, with mini 4-pin connector (TA4F)
Shure BETA 54The Shure BETA 54 is a subminiature, electret condenser headworn microphone. It provides uncompromised sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring. Despite the small size, the condenser element delivers full, clear, and natural reproduction of speech and vocals. The microphone features a durable, low-profile wire frame headband which is fully adjustable for stability and comfort. A plastic carrying case protects the microphone and its accessories. Features:Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejectionExtended frequency response tailored for vocal performancesAble to handle extremely high sound pressure levels (SPL)Snap-fit foam windscreens stay in place during intensive movementAvailable with an in-line preamp or with a TA4F connector for wireless applicationsTechnical Specifications:Type:Condenser (electret bias) Frequency Response:50Hz to 20KHz Polar Pattern:Supercardioid Output Noise (equivalent dBSPL, A-weighted):39.0 dB typical; 42.0 dB maximum Signal-to-Noise Ratio:55.0 dB at 94 dB SPL Recommended Minimum Input Impedance:>1 kilohm Preamp Output Impedance:136 ohms Output Level, open circuit, ref. 1v/Pa at 1 kHz:-52.0 +/- 3.0dB 2.51mV Maximum Sound Pressure Level:149 dBSPL at 1% THD/1 kilohm load Dynamic Range:110 dB (max. SPL with 1k load, minus typical A-wt. noise) Current Drain:4.6 mA (preamp and microphone) Power Requirements:Phantom power; 11 to 52 Vdc positive on pins 2 and 3, return on pin 1 (ground) Net Weight:135.35 g (4.75 oz.) microphone and in-line preamp Cable:1.5 m (5 ft.), small-diameter, shielded, with mini 4-pin connector (TA4F)
Shure BETA 56 AThe Shure Beta 56®A microphone has a frequency response specifically tailored for drums and instruments. Its extremely uniform supercardioid pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.Features:Tailored frequency response provides drums, amplified instruments, and horns with studio quality soundBuilt–in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibilityUniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis soundCompact design reduces stage clutterHardened steel mesh grille resists wear and abuseNeodymium magnet for high signal–to–noise ratio outputMinimally affected by varying load impedanceAdvanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibrationLegendary Shure quality and reliabilityTechnical Specifications:Type:Dynamic (moving coil) Frequency Response:50 to 16,000 Hz Polar Pattern:Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency Output Level (at 1,000 Hz):Open Circuit Voltage -51 dBV/Pa (2.8 mV) Impedance:Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Polarity:Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Connector:Three-pin professional audio connector (male XLR type) Case:Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille Adjustable, Locking Stand Adapter:Integral, dynamic locking, adjustable through 180 degrees with standard 5/8"-27 thread Net Weight:468 grams (16.7 oz)
Shure BETA 57 AThe Shure Beta 57A® is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off–axis tone coloration. Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals. Features: Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse Neodymium magnet for high signal–to–noise ratio output Minimally affected by varying load impedance Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration Legendary Shure quality and reliabilityTechnical Specifications:Type:Dynamic (moving coil) Frequency Response:50 to 16,000 Hz Polar Pattern:Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency. Output Level (at 1,000 Hz):Open Circuit Voltage -51 dBV/Pa* (2.8 mV) Impedance:Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z. Phasing:Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. Connector:Three-pin professional audio connector (male XLR type). Case:Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille. Adjustable Stand Adapter:Slip-in, adjustable through 180 degrees, with standard 5/8"-27 thread. Net Weight:275 grams (9.6 oz)
Shure Beta 58A
The Shure Beta 58A® is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide. The Beta 58A maintains a true supercardioid pattern throughout its frequency range. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Features: Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound Neodymium magnet for high signal–to–noise output Hardened steel mesh grille that resists wear and abuse Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration Minimally effected by varying load impedance Legendary Shure quality and reliabilityTechnical Specifications:Type:Dynamic (moving coil) Frequency Response:50 to 16,000 Hz Polar Pattern:Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency. Output Level (at 1,000 Hz):Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV)Impedance:Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing. Case:Silver blue enamel-painted die cast metal with hardened, matte-finished, spherical steel mesh grille. Adjustable, Stand Adapter:Slip-in microphone mounting, unbreakable, adjustable through 180 degrees with standard 5/8"-27 thread, black finish. Net Weight:278 grams (9.92 oz)
Shure BETA87A Super Cardioid Handheld Condenser MicrophoneThe Beta 87 has consistently been a top choice of performers and audio technicians around the world due to its superb accuracy and detail, and rich vocal production. This long-standing favorite now features a new design and has been renamed the Beta 87A TM.In response to user requests, Shure has redesigned this microphone by just slightly thickening the handle for a more comfortable feel when hand-held. In addition, the Beta 87A now includes the A25D break-resistant swivel adapter.The Shure Model Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level (SPL) capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87Acombines superb performance with the ruggedness needed for touring and field production.The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the "boomy" sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.• Supercardioid polar pattern remains uniform throughout the frequency range allowing higher gain before feedback and reduced background noise pickup.• Wide dynamic range (113dB) and low distortion characteristics.• Phantom powered, accepts voltages from 11 to 52 volts.• Smooth frequency response 50 to 18 kHz with a gradual presence rise and minimal off-axis coloration.• Low susceptibility to RFI, electrostatic and electro-magnetic hum.• Advanced cartridge shock mount system reduces handling noise. For more information, please visit this products webpage.
Shure Beta 87C
Excellent for touring professionals, the Beta 87C premium vocal microphone delivers studio-grade performance and a smooth, extended high-end frequency response in a cardioid condenser design. The microphone adds warmth to the frequency response and creates an ideal environment for in ear personal monitoring. And its highly consistent cardioid pattern offers excellent rear rejection.Vocalists who use earphone monitor systems such as Shure PSM® will appreciate how effectively the BETA 87C rejects ambient sound from the rear of the microphone.Features: Smooth, wide frequency response, slight presence rise Uniform cardioid polar pattern for maximum isolation Minimum off-axis tone coloration Low-frequency roll-off compensates for proximity effect Three-stage pop filter minimizes breath pop and noise Break-resistant stand adapter Frequency response: 50 - 20,000 HzTechnical Specifications:Transducer Type:Condenser (electret bias) Frequency Response:50 to 20,000 Hz Polar Pattern:Cardioid Output Impedance:Rated at 150 ohms (100 Ohms actual +/- 20%) Sensitivity (at 1,000 Hz):Open Circuit Voltage: -51 dBV/Pa (2 mV) Output Clipping Level:1000 Ohm Load at 1,000 Hz: -6 dBV (0.5 V) Maximum SPL:139 dB at 1,000 Hz (0.25% THD, 1000 Ohm load)Self-Noise:22 dB typical, A-weighted ,24 dB typical, weighted per DIN 45 405Dynamic Range:117 dB (maximum SPL to A-weighted noise level) Hum Sensitivity:-5 dB equivalent SPL, maximum, in a 1 mOe field (60 Hz) Signal-to-Noise Ratio:72 dB at 94 dB SPL (IEC 651)* Polarity:Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector. Power:Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 ,Current Drain: 1.0 to 1.2 mA Connector:Three-pin (XLR) professional audio Case:Aluminum construction with painted blue metallic finish, and hardened steel grille with nickel satin chrome platingNet Weight:Net: 207 grams (7.6 oz) ,Packaged: 565 grams (1.24 lbs) Environmental Conditions:Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F)(relative humidity <90%) ,Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity <80%)
Das Beta 91A ist ein Grenzflächen-Mikrofon zur Abnahme von Bassdrum und anderen tieffrequenten Instrumenten sowie die Flügelabnahme. Die Kondensatorkapsel und der im Gehäuse integrierte Vorverstärker bieten eine exzellente Ansprache mit druckvollen und impulstreuen Tiefbässen. Ein Schalter ermöglicht die Anpassung des FrequenzgangsDer Frequenzgang gibt die Übertragung (Pegel) über den Frequenzbereich an.Mehr lesenZum Glossar, um ein Dröhnen zu vermeiden.
Wie klingt das Beta 91A?
Die Grenzfläche Beta 91A vereint die Klang-Eigenschaften des Mikrofon-Urgesteins SM91 - das vor allem bei der Abnahme von Flügel und Piano Verwendung fand – mit dem satten Punch des Beta 91 - beliebt in der Bassdrum und anderen tieffrequenten Instrumenten. Durch diese gelungene Kombination ergibt sich mit dem Beta 91A ein Halbnieren-Mikrofon mit geringem Grundrauschen, das auch extrem hohe Schalldrücke problemlos verarbeiten kann. Ein schaltbarer Filter schwächt die unteren Mitten ab, um ein Dröhnen der Bassdrum zu vermeiden.
Was ist der Vorteil einer Grenzfläche?
Der größte Vorteil eine Grenzfläche ist die schnelle und unkomplizierte Positionierung. Das Mikrofon wird ohne zusätzliches Befestigungsmaterial einfach in die Bassdrum gelegt – es stehen keine Stative im Weg.
Tipp: Beta 91A in Kombination mit dem Beta 52A
Sehr beliebt bei Tontechnikern ist der Einsatz des Beta 91A in Kombination mit dem Beta 52A. Das Beta 91A wird dabei innerhalb (für maximalen Attack), das Beta 52A außerhalb der Bassdrum angebracht (für maximalen Punch).
Einsatz auch am Klavier und Flügel möglich
Auch üblich mit einer Grenzfläche ist die Abnahme eines Klaviers oder Flügels. Das Mikrofon wird dabei innen an den Deckel angebracht.
Was ist der Unterschied zum Vorgänger Beta 91
Das Beta 91A hat den Vorverstärker im Gehäuse integriert - das erleichtert das Setup. Weiterhin hat das Beta 91A einen Sound, der an das SM91 angelehnt ist, sowie einen Schalter zur Absenkung der unteren Mitten.
Grenzflächen-Kondensatormikrofon der Spitzenklasse
Vor allem geeignet für die Bassdrum, Flügel und klavier
Exzellente Ansprache mit massiven, kontrollierten Tiefbässen und präsentem Attack
Vorverstärker integriert im Gehäuse, erleichtert das Setup
Schalter zur Anpassung des FrequenzgangsDer Frequenzgang gibt die Übertragung (Pegel) über den Frequenzbereich an.Mehr lesenZum Glossar
Gleichmäßige Halbnierencharakteristik bietet hohe Rückkopplungssicherheit
Überträgt auch sehr hohe Lautstärken ohne Verzerrungen
Platzsparend: keine Verwendung von Mikrofonstativen notwendig
Korb aus gehärtetem Stahl und extrem robuste Metallkonstruktion schützen vor Beschädigungen
Spezifikationen
Kapseltyp: Kondensator (Kondensatormikrofone liefern einen detaillierten Klang. Benötigen meist Phantomspannung)
RichtcharakteristikDie Richtcharakteristik gibt an, wie laut ein Mikro Schallquellen aus verschiedenen Richtungen hört.Mehr lesenZum Glossar: HalbniereBei Grenzflächen-Mikrofonen mit Nierencharakteristik spricht man von „Halbniere“.Mehr lesenZum Glossar
Übertragungsbereich: 20 Hz - 20 kHz
EmpfindlichkeitAusgangsspannung, die das Mikrofon bei einem bestimmten Schalldruck produziert.Mehr lesenZum Glossar: 48,5 dBV/Pa / 3,8 mV/Pa
EigenrauschenGrundrauschen des Vorverstärkers eines Kondensatormikrofons.Mehr lesenZum Glossar:
25,5 dB(A)
Max. Schalldruck:
155 dB
Gewicht: 470 g
Lieferumfang
1x Mikrofontasche (Art.-Nr.: 95A2314)
Shure BETA 98 SThe Shure Beta 98/S is a compact, high-output supercardioid condenser microphone for professional sound reinforcement and studio recording. Its extremely uniform supercardioid pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise. Its high maximum sound pressure level (SPL) makes it useful for a variety of instruments including drums, piano, reed, wind, and string. The Beta 98/S can also be used for amplified guitars. The optional A98D drum mount has a specially designed gooseneck that allows the microphone to be positioned freely, yet holds it securely in place once the ideal placement has been found.Features:Tailored frequency response for studio quality performanceWide dynamic range for use in high SPL environmentsUniform supercardioid pattern for high gain before feedback and superior rejection of off-axis soundOptional A98D drum mount is unobtrusive and versatile, allowing precise positioning of the microphone while holding it firmly in placeCompact design reduces stage clutterDetachable cable for easy storageInterchangeable microphone cartridges with different polar patterns are availableLegendary Shure quality, ruggedness, and reliabilitTechnical Specifications:Type:Condenser (electret bias) Frequency Response:20 to 20,000 Hz Polar Pattern:Supercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available. Output Level (at 1,000 Hz):Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical Dynamic Range:(at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load) 125 dB (max SPL minus A-weighted noise) Output Noise:35 dB SPL, A-weighted Signal-to-Noise Ratio:59 dB re 94 dB SPL Output Impedance:Rated at 150 ohms (actual) Hum Pickup:-7.5 dB equivalent SPL in 1 mOe field (60Hz) Polarity:Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Phantom Power:48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3. Case: Microphone: Matte black enamel brass case and stainless steel inner grille Dimensions:Microphone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.) .Preamplifier: 20 mm X 99 mm (0.79 in. X 3.89 in.) Net Weight:Microphone: 12 g (0.4 oz) less cable ,Preamplifier: 96 g (3.4 oz)
The Beta 98AC is Compact, high-output miniature condenser microphone for instrument sound reinforcement and recording applications. Designed for a variety of placement options on acoustic or amplified instruments including drums, piano, reed, wind and strings. It includes shock-mount swivel adaptor RK282 attaches to any microphone stand.Features:
Type: Electret Condenser
Frequency Response: 20Hz-20kHz
Polar Pattern: Cardioid
Output Impedance: 179 ohms
Sensitivity (at 1kHz, open circuit voltage): -48.0 dBV/Pa (4.0 mV)
Maximum SPL (1kHz at 1% THD) 1,000 ohm load: 144dB
Signal-to-Noise Ratio (referenced at 94dB SPL at 1kHz): 64dB
Dynamic Range (at 1kHz) 1,000 ohm load: 114dB
Common Mode Rejection (20Hz-20kHz): >50 dB
Clipping Level (1kHz at 0.25% THD): 1,000 ohm load: 1.0dBV (1.26V)
Self Noise (typical, equivalent SPL, A-weighted): 30dB SPL
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight: 0.6 oz.
Connector: 3-pin XLR, male, balanced
Power Requirements: 11-52Vdc phantom, 3.6mA
The Shure Beta 98A D/C Miniature Cardioid Condenser Microphone is essentially a Shure Beta 98A accessorized with the A98D drum mount and 15' cable. The package is intended to perfectly mount and position the Beta 98A onto drum and percussion instruments for recording and live sound applications. Its cardioid polar pattern effectively minimizes off-axis feedback and noise, and its tailored frequency response reproduces drums with pristine results. The Beta 89A's high SPL response captures transients without noise and distortion. Its miniature profile is ideal for close positioning, without interfering with the performance.
Uniform cardioid polar pattern provides maximum gain-before-feedback and rejection of off-axis sound for smooth high-end response and control
Frequency response tailored for drums and percussion applications with a wide dynamic range for use in high SPL environments
Precision-engineered design for unobtrusive microphone footprint
Beta 98A models ship with external in-line preamplifier for discrete cable placement, snap-fit windscreen, and zipper pouch
Beta 98AD/C ships with A98D drum mount featuring a flexible gooseneck for precise placement and secure attachment
Beta 98A/C ships with RK282 shock mount swivel adapter for attachment to any standard microphone stand
Specifications
Transducer Electret Condenser
Polar Pattern Cardioid
Frequency Response 20 to 20,000 Hz
Dynamic Range (Typical) 1000 Ohm load: 114 dB
Signal-to-Noise Ratio 64 dB
Maximum Input Sound Level 1000 Ohm load: 144 dB
Power Requirements 11-52 VDC phantom, 3.6 mA
Output Impedance 179 Ohms
Output Connectors 3-Pin XLR
Weight Net: 12g (0.6 oz.)
€255.00*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...