W2344 MK2 RS-MATRIX - Extended stereo image processing system
The W2344 is designed by the RS-Laboratory to process audio material in stereo and M/S mastering environments. With two flexible inserts external signal processors can be integrated in the the stereo chain as well as in the M/S signal path. The integrated switch matrix of both inserts, featuring a pre/post and an on/off function, and the flip function between insert 1 and insert 2 allow an immediate evaluation of the M/S and the stereo processing with or without the external signal processors. W2344 extended aural editing system (RS Matrix)
W2344 MK2 filter functions
Control function for the phasing of the left channel
Control switch for mono compatibility
Switch to swap both inputs
Continuous control of the input gain between -5 dB and +5 dB
Control of the stereo width from mono to a factor of two
Pre listening function of the stereo width with a dedicated switch
Phase corrected solo function for the mid and the side signal
Two fully parametric M/S EQs with activation switch (filter on)
Two separate switchable inserts in the M/S- or stereo-signal chain
Pre-/post function of the inserted signal processors
Flip function for both inserts 1 and 2
source 1/2The W2344 allows the selection of two stereo input sources
L+R / phase L / L<->R - Mono compatibility phase and left/right inversionThe W2344 comes with a mono switch (L+R) in the input section to check mono compatibility, a phase switch (phase L) - so that the phase of the left channel can be changed to 180 degrees - and a switch to invert the left and right channels (L<->R)
input levelSeparated controls for L and R allow to adjust the input level in a range of ± 5 dB.
insert 1 / insert 2Inserts for external signal processors with pre- and post-function.Both inserts can be alternatively switched to the stereo signal chain as well as before (pre) or after (post) the M/S matrix. An example for such an application is the quick comparison of the processor setting in M/S or stereo.
solo - M and S solo functionThe W2344 system offers the possibility to monitor the phase corrected side and mid signal with separate solo switches for the M and S signal.
The EQ sectionThe system offers the possibility of editing the mid and the side signal separately via two integrated fully parametric equalizers. Thereby different resolutions of the filter frequency in both channels ensure an optimal adjustment for the use in the side and the mid channel. The filter frequency and the gain can be controlled precisely with the dedicated knobs for each parameter. The frequency range of the filter can be extented with a dedicated switch to a factor of 3.
The range of the Q factor can be set between 0.3 and 10 with a 9-stage ELMA switch and in the initial and end position of the ELMA switch the bandpass filter can be switched to a highpass or lowpass filter with the possibility to set the cut-off frequency with the "frequency" control. To control filter effects on the audio signal, both filter modules can be activated / deactivated via two "filter-on" switches.
Flip function of insert 2With the flip function insert 1 and insert 2 can be swapped instantly.
The stereo-width functionThe continous stereo width potentiometer controls the width of the side channel from mono to a factor of two. The impact of the edited base width can be compared with the setting of the unedited setting via a dedicated switch "normal stereo".
on - bypass-switchDeactivates the RS_MATRIX via hard-bypass (on)
The user interfaceAll pushbutton switches of the W2344 are illuminated if they are activated. That offers a reliabale visual control of all settings of the unit.
Optionally available is a rasterized resolution of the filter potentiometers, that allows a complete reproduction of all settings. With this option the W2344 becomes an ideal tool for ambitious mastering jobs.
ApplicationsUniversal mastering tool for complex editing of stereo and M/S signals, change of the range layering of individual instruments or tone ranges with the simultaneous possibility to adjust the stereo image and the spatial resolution, integration of external signal processors for the individual modification of the M/S matrix and the usage in different mastering environments, highpass filter for A/D converters, maximization of the level in mastering environments, adjustment of the stereo width with the possibility to use a higher factor than one to compensate mistaken stereo width settings, stereo width correction for vinyl cutting to improve the utilization of the playing time and avoide overmodulation of the cutting stylus
Technische Daten
Netzspannung 230 V +/- 10%, 50 Hz
Leistungsaufnahme 70 VA
Ausgangsspannung +/- 16 Volt
Ausgangsstrom 2,2 A bei +/- 16 V
Spannungsstabilität +/- 0,05% bei max. Laständerung
Restwelligkeit 0,2 mV +0.05% der Ausgangsspannung, Vss
Langzeitstabilität +/- 0.05% für 24 Stunden nach Warmlauf
Temperatur Koeffizient +/- 0.015 /°C max.
Einschwingverhalten < 55 Mikrosekunden für 50% Laständerung
Wirkungsgrad 60%
Spannungs-Kompensation 4-Draht-Leitersystem vorbereitet (Remote Sensing)
Kurzschlusssicherung (Automatische Strombegrenzung mit Foldback-Funktion)
Applikationen
Netzgerät für den 10er Modulträger S2310 zur Nutzung von api ® 500 Modulen
Kompatibel mit api L200 PSU jedoch ohne Phantomspannung
Technische Daten
Netzspannung 230 V +/- 10%, 50 Hz
Leistungsaufnahme 70 VA
Ausgangsspannung +/- 16 Volt
Ausgangsstrom 2,2 A bei +/- 16 V
Spannungsstabilität +/- 0,05% bei max. Laständerung
Restwelligkeit 0,2 mV +0.05% der Ausgangsspannung, Vss
Langzeitstabilität +/- 0.05% für 24 Stunden nach Warmlauf
Temperatur Koeffizient +/- 0.015 /°C max.
Einschwingverhalten < 55 Mikrosekunden für 50% Laständerung
Wirkungsgrad 60%
Spannungs-Kompensation 4-Draht-Leitersystem vorbereitet (Remote Sensing)
Kurzschlusssicherung (Automatische Strombegrenzung mit Foldback-Funktion)
Applikationen
Netzgerät für den 10er Modulträger S2310 zur Nutzung von api ® 500 Modulen
Kompatibel mit api L200 PSU jedoch ohne Phantomspannung
Technische Daten
Netzspannung 230 V +/- 10%, 50 Hz
Leistungsaufnahme 73 VA
Ausgangsspannung +/- 16 Volt u. +48 V
Ausgangsstrom 2,2 A bei +/- 16 V, 50 mA bei +48 V
Spannungsstabilität +/- 0,05% bei max. Laständerung
Restwelligkeit 0,2 mV +0.05% der Ausgangsspannung, Vss
Langzeitstabilität +/- 0.05% für 24 Stunden nach Warmlauf
Temperatur Koeffizient +/- 0.015 /°C max.
Einschwingverhalten < 55 Mikrosekunden für 50% Laständerung
Wirkungsgrad 60%
Spannungs-Kompensation 4-Draht-Leitersystem vorbereitet (Remote Sensing)
Kurzschlusssicherung (Automatische Strombegrenzung mit Foldback-Funktion)
Applikationen
Netzgerät für den 10er Modulträger S2310 zur Nutzung von api ® 500 Modulen inkl. 48 V Phantomspeisung
Universal filter W2377 api® 500 system
W2377 filter functions
Level potentiometer with midway indent at 0dB
Frequency potentiometer for low, mid and high band filter
9 stepped ELMA switch for the adjustment of the filter resonance (Q-factor)
Frequency selective high-pass and low-pass filter function
Illuminated switches for the true bypass and solo function
Illuminated button (Focus) activates the invert-function of the level control
The three fully parametric RS Audio Technique W2377 filter modules covers the complete frequency range from 20Hz to 23KHz. The level potentiometer allow continuous gain settings with an effective range of +/-10dB. Furthermore the midway indent at 0dB facilitates the mechanical handling.
The setting of the overlapping frequency bands (low, mid, high) with just three different modules allows a precise control of each band and offers the possibility to combine the modules at will. The filter resonance can be set in steps from 0,3 to 10 and the via left stop position respectively the right stop position a high-pass or low-pass filter can be activated. The frequency control adjust the limiting frequency of these filters.
Via the illuminated switches and buttons a quick change between processed and unprocessed material is possible at any time. An Off switch activates the true bypass function, which removes the unit from the signal chain without undesired effects. In a network of more than one W2377 the Solo switch bypasses all operating units, so that only the chosen modul is active. The Focus button inverts the level of a module so that a quick selection of the frequency components, that has to be manipulated is easy.
The units are aligned with the api® 500 series and can be integrated in any api® environment. High-quality ALPS® potentiometers and step switches from ELMA® ensure a long-term usage of the units in continuous operation. For the alignment of different studio environments the level matching of the in- and outputs can be adjusted with a variable resistor on the printboard.
Applications
First-class fully parametric filter module for api® 500 systems for frequency correction during recording, mixing and mastering as well as effect filter for delimitation of the band and accordingly the elimination of interference frequencies
Universal filter W2377 api® 500 system
W2377 filter functions
Level potentiometer with midway indent at 0dB
Frequency potentiometer for low, mid and high band filter
9 stepped ELMA switch for the adjustment of the filter resonance (Q-factor)
Frequency selective high-pass and low-pass filter function
Illuminated switches for the true bypass and solo function
Illuminated button (Focus) activates the invert-function of the level control
The three fully parametric RS Audio Technique W2377 filter modules covers the complete frequency range from 20Hz to 23KHz. The level potentiometer allow continuous gain settings with an effective range of +/-10dB. Furthermore the midway indent at 0dB facilitates the mechanical handling.
The setting of the overlapping frequency bands (low, mid, high) with just three different modules allows a precise control of each band and offers the possibility to combine the modules at will. The filter resonance can be set in steps from 0,3 to 10 and the via left stop position respectively the right stop position a high-pass or low-pass filter can be activated. The frequency control adjust the limiting frequency of these filters.
Via the illuminated switches and buttons a quick change between processed and unprocessed material is possible at any time. An Off switch activates the true bypass function, which removes the unit from the signal chain without undesired effects. In a network of more than one W2377 the Solo switch bypasses all operating units, so that only the chosen modul is active. The Focus button inverts the level of a module so that a quick selection of the frequency components, that has to be manipulated is easy.
The units are aligned with the api® 500 series and can be integrated in any api® environment. High-quality ALPS® potentiometers and step switches from ELMA® ensure a long-term usage of the units in continuous operation. For the alignment of different studio environments the level matching of the in- and outputs can be adjusted with a variable resistor on the printboard.
Applications
First-class fully parametric filter module for api® 500 systems for frequency correction during recording, mixing and mastering as well as effect filter for delimitation of the band and accordingly the elimination of interference frequencies
Universal filter W2377 api® 500 system
W2377 filter functions
Level potentiometer with midway indent at 0dB
Frequency potentiometer for low, mid and high band filter
9 stepped ELMA switch for the adjustment of the filter resonance (Q-factor)
Frequency selective high-pass and low-pass filter function
Illuminated switches for the true bypass and solo function
Illuminated button (Focus) activates the invert-function of the level control
The three fully parametric RS Audio Technique W2377 filter modules covers the complete frequency range from 20Hz to 23KHz. The level potentiometer allow continuous gain settings with an effective range of +/-10dB. Furthermore the midway indent at 0dB facilitates the mechanical handling.
The setting of the overlapping frequency bands (low, mid, high) with just three different modules allows a precise control of each band and offers the possibility to combine the modules at will. The filter resonance can be set in steps from 0,3 to 10 and the via left stop position respectively the right stop position a high-pass or low-pass filter can be activated. The frequency control adjust the limiting frequency of these filters.
Via the illuminated switches and buttons a quick change between processed and unprocessed material is possible at any time. An Off switch activates the true bypass function, which removes the unit from the signal chain without undesired effects. In a network of more than one W2377 the Solo switch bypasses all operating units, so that only the chosen modul is active. The Focus button inverts the level of a module so that a quick selection of the frequency components, that has to be manipulated is easy.
The units are aligned with the api® 500 series and can be integrated in any api® environment. High-quality ALPS® potentiometers and step switches from ELMA® ensure a long-term usage of the units in continuous operation. For the alignment of different studio environments the level matching of the in- and outputs can be adjusted with a variable resistor on the printboard.
Applications
First-class fully parametric filter module for api® 500 systems for frequency correction during recording, mixing and mastering as well as effect filter for delimitation of the band and accordingly the elimination of interference frequencies
V2359j amp4ribbon Funktionen• V - Grundverstärkung 26 dB - 59 dB• pad -15dB - Vordämpfung -15 dB mittels Druckschalter aktivierbar• Z - Impedanzregler 150 Ohm bis 22 kOhm• LF - Tiefenentzerrung / Hochpassfilter 0 bis -17 dB Regelbereich bei 20 Hz• MF - Mitten-Entzerrung 155 Hz - 3,5 kHz, +/- 10 dB• Q - Güte der Mitten-Entzerrung , 1,5 / 0,4, fest und 1,5 - 3,5 regelbar• HF - Höhenentzerrung durch Baxandall-Klangregelung +/- 12 dB bei 9 kHz• bypass filter - Deaktivierung der Filterfunktionen mittels Druckschalter• +48 V - Zuschaltbare Phantomspannung durch Druckschalter (Abschaltung des Impedanz-Reglers)• alle Parameter außer dem Q-Faktor lassen sich stufenlos anpassen
Der V2359j Bändchen-Mikrofon-Verstärker ermöglicht die universelle Anpassung passiver Schallwandler (Bändchen-, Tauchspulen-, Kohle-, Piezo-, Kristall-Mikrofon) an das Programm-Material sowie der Aufnahmesituation. Mit einer stufenlos einstellbaren Vorverstärkung im Bereich von 26 dB bis 59 dB und einer zuschaltbaren Dämpfung (-15 dB pad) wurde auch der Entwicklung exotischer Schallwandler Rechnung getragen.
Auch der Wertebereich der Impedanz-Anpassung durch das Impedanz-Poti (Z) wurde großzügig von 150 Ohm bis 22 kOhm ausgelegt, um durch Veränderung der Lastimpedanz eine Optimierung der linearen Übertragungsfunktion zu erzielen, oder auch als kreatives Werkzeug durch Fehlanpassung zur Veränderung des Frequenzverlaufes.Die tonale Anpassung erfolgt für den Hochtonbereich als Baxandall-Klangsteller, in den Mitten durch einen quasi-parametrischen Entzerrer und bei den tiefen Frequenzen mittels Hochpassfilter. Alle Filterparameter können kontinuierlich, also stufenlos verändert werden. Um die Wirkung der eingestellten Filter überprüfen zu können steht ein beleuchteter Druckschalter (bypass filter) zur Verfügung.Für die Verwendung von Mikrofonen mit Fernspeisung ist eine zuschaltbare +48 V Phantom-Spannung integriert.Der V2359j kann in jeder api 500 ® - Umgebung installiert werden. Hochwertige ALPHA ® - Potentiometer/Fader und beleuchtete Druckschalter von eao ® , sowie die vergoldete Anschlussleiste garantieren einen langen und störungsfreien Betrieb im Dauereinsatz.
ApplikationenMikrofon-Vorverstärker mit drei integrierten Filtern, variable Anpassung passiver Schallwandler (Bändchen-, Tauchspulen-, Kohle-, Piezo-, Kristall-Mikrofon) an das Programmmaterial, ermöglicht die Reduzierung und/oder Betonung von störenden/erwünschter Frequenzen
W2324 phase shifter (api® 500 System)
W2324 phase shifter functions
Filter gain range of -5 dB to + 5 dB via 41-position stepped potentiometer (1/4 dB resolution)
Continuously adjustable phase angle between 10° and 125 °
3-position flip switch to extend phase angle from 190° to 305°
Bypass position for quick and easy comparison with the uncorrected signal
1-position ELMA rotary switch to select frequency range from 23 Hz to 1.57 kHz
The W2324 is a high-precision tool to solve phase problems in sound recording and playback applications. Comb filtering is a common and usually undesirable effect caused by differences in phase when combining multiple signals from one source, such as a microphone and a DI signal from an electric guitar or multiple microphones on a kick drum. The W2324 phase shifter is the ultimate tool to hone in and correct those phase problems with unheard-of accuracy and sound quality. Alternatively, experienced engineers will appreciate the creative sound design possibilities offered by the module.
Furthermore, the W2324 can be used in the subwoofer path of any playback system to optimize the low-frequency response and remedy room mode issues thanks to the continuously adjustable phase angle.
Within the selectable frequency range of 23 Hz to 1.57 kHz any frequency build-ups or cancellations due to the time delay between two sources or (when used in the playback path) due to problematic room acoustics can be addressed by shifting of the phase. Simply select the desired frequency range with the 11-position rotary switch and correct the level and phase. A 3-position flip switch further allows phase angle extension of 180° as well as providing a bypass position for a quick and easy comparison with the uncorrected signal.
As all Roger Schult products, the W2324 is hand-crafted and precision-engineered in Germany.
Applications
Correct the phase between multiple microphone signals and avoid comb filtering, e.g. when tracking kick drums or electric guitars
Get full control to address phase problems when mixing a DI signal with a microphone signal, e.g. for guitar or bass recordings
Match and optimize the phase response of a subwoofer in a 2.1, 5.1 or x.1 monitoring system
Remedy room mode issues and bass problems in your monitoring setup
Create ultra-wide sounds and phase sweeps by deliberate phase manipulation of one side of stereo tracks
Universalfilter W2377 5th Anniversary (api® 500 system)
Same as the MK2 but with hand signed white faceplate (limited edition)
W2377 MK2 filter functions
Fully parametric, analogue filter covering the entire frequency range from 20 Hz to 23.3 kHz
Three switchable overlapping frequency ranges: 20 Hz to 233 Hz, 200 Hz to 2330 Hz, 2 kHz to 23.3 kHz
High precision frequency selection via rotary control
Adjustable Q-factor (0.3 to 10) via high-grade ELMA switch
Filter gain range of -10 dB to +10 dB via continuously variable potentiometer
User-selectable high- and lowpass functionality across the entire frequency range
Illuminated true bypass switch
The W2377 MK2 filter was conceived and designed for recording and mixing studios, satisfying the demand for covering the entire audio spectrum with a single filter unit. This universal filter concept allows using the W2377 MK2 as a subtle program equalizer, and/or as creative tool for radical EQ and tone shaping alike.
The W2377 MK2's fully parametric filter with three selectable frequency ranges covers the entire audio spectrum from 20 Hz to 23.3 kHz. Usefully, the overlapping frequency ranges are split into three decades that can be selected via a three-position switch to provide precise access to the entire frequency range of the unit. A high-grade, selected potentiometer adjusts the operating frequency while the Q-factor of the bell filter may be set between 10 and 0.3 via a rotary switch. As an additional feature, the Q-factor control includes a selectable high or low pass with a slope of 12 dB/octave at the left and right limits of the switch. A backlit "on" pushbutton relay switch enables or disables the filter without switching noises in the signal chain. Conveniently, the brightness of the backlight can be adjusted using jumpers on the unit's electronics board.
As all Roger Schult products, the W2377 is hand-crafted and precision-engineered in Germany.
Applications
First-class fully parametric filter module for api® 500 systems for frequency correction during recording, mixing and mastering as well as effect filter for delimitation of the band and accordingly the elimination of interference frequencies
Universalfilter W2377 MK2 (api® 500 system)
W2377 MK2 filter functions
Fully parametric, analogue filter covering the entire frequency range from 20 Hz to 23.3 kHz
Three switchable overlapping frequency ranges: 20 Hz to 233 Hz, 200 Hz to 2330 Hz, 2 kHz to 23.3 kHz
High precision frequency selection via rotary control
Adjustable Q-factor (0.3 to 10) via high-grade ELMA switch
Filter gain range of -10 dB to +10 dB via continuously variable potentiometer
User-selectable high- and lowpass functionality across the entire frequency range
Illuminated true bypass switch
The W2377 MK2 filter was conceived and designed for recording and mixing studios, satisfying the demand for covering the entire audio spectrum with a single filter unit. This universal filter concept allows using the W2377 MK2 as a subtle program equalizer, and/or as creative tool for radical EQ and tone shaping alike.
The W2377 MK2's fully parametric filter with three selectable frequency ranges covers the entire audio spectrum from 20 Hz to 23.3 kHz. Usefully, the overlapping frequency ranges are split into three decades that can be selected via a three-position switch to provide precise access to the entire frequency range of the unit. A high-grade, selected potentiometer adjusts the operating frequency while the Q-factor of the bell filter may be set between 10 and 0.3 via a rotary switch. As an additional feature, the Q-factor control includes a selectable high or low pass with a slope of 12 dB/octave at the left and right limits of the switch. A backlit "on" pushbutton relay switch enables or disables the filter without switching noises in the signal chain. Conveniently, the brightness of the backlight can be adjusted using jumpers on the unit's electronics board.
As all Roger Schult products, the W2377 is hand-crafted and precision-engineered in Germany.
Applications
First-class fully parametric filter module for api® 500 systems for frequency correction during recording, mixing and mastering as well as effect filter for delimitation of the band and accordingly the elimination of interference frequencies
W2389f - Funktionen
Umwandlung von Stereo in M/S und zurück
Gezielte Bearbeitung von Mitten- und Seitenkomponente
Universelle Konzeption für verschiedene Anwendungen
Symmetrische, pegelfeste Einschleifwege
Niederohmiger Send zur zur Ansteuerung von Low-Z Geräten
Hohe Signalgüte in Mastering-Qualität
Bypass-Schalter zur einfachen Kontrolle der Signalbearbeitung
Umschaltbar von M/S auf konventionelle L/R-Bearbeitung
Extrem kompakte Ausführung für api 500 ® kompatible Racks und Mischpulte
Die in Analogtechnik aufgebaute M/S - Präzisionsmatrix W2389f ermöglicht den getrennten Zugriff auf die Mitten- und die Seitenkomponente im Stereosignal und erschließt dadurch besondere Gestaltungsmöglichkeiten beim Mastering. Durch die eingebaute Rückwandlung in L/R ist der Einsatz der Matrix besonders unkompliziert, sie kann einfach in den Stereo-Signallauf eingeschleift werden.Das ankommende L/R-Signal wird hochpräzise in Mitten- und Seitenkomponente umgewandelt, die dann am niederohmigen Send-Ausgang für die Bearbeitung mit externen Geräten bereit stehen. Über den universell auch für hochohmigere Vintage-Effekte ausgelegten Return-Eingang rückgeführte Signale werden anschließend wieder exakt in ein L/R-Stereosignal umgewandelt. Wahlweise kann der M/S-Einschleifweg auch auf konventionellen L/R-Betrieb umgeschaltet werden.Zum einfachen Vergleich mit dem unbearbeiteten Originalsignal stehen zudem knackfrei arbeitende Bypass-Schalter bereit; im M/S-Modus arbeiten diese getrennt, da hier ja gerade die verschiedenartige Bearbeitung interessant ist, während sie im L/R-Modus automatisch gekoppelt werden. Besteht für die Rückwandlung in L/R kein Bedarf, kann das Gerät auch als zweifacher M/S-Umwandler genutzt werden. Als nützliches Tool bei Aufnahme, Mischung und Mastering bietet die kompakte Präzisionsmatix in Verbindung mit diversen Outboard-Geräten verschiedene Anwendungen.Applikationen:
Getrennte Bearbeitung von Mitten- und/oder Seitenkomponente durch externe Geräte, konventionelle Bearbeitung im L/R-Modus, nachträgliche Korrektur der Stereo-Breite, von Mono bis Überstereo, Neugewichtung der Hall- und Solistenanteile in bestehenden Stereoaufnahmen, Umwandlung von L/R in M/S und umgekehrt ohne Rückwandlung kann das Gerät als doppelter M/S-Umsetzer verwendet werden.
W2395 Studio Tone Shaper (api 500 ® - system)
W2395 filter features
high band active Baxandall tone control
selectable shoulder frequencies: 1.9 kHz, 3.6 kHz, and 6.3 kHz
gain control via 30 mm fader with +/- 12 dB range
mid band semi-parametric filter
continuously variable filter between 155 Hz and 3500 Hz
gain control via rotary potentiometer with +/- 12 dB range
low band active Baxandall tone control
selectable shoulder frequencies: 45 Hz, 66 Hz, and 90 Hz
gain control via 30 mm fader with +/- 12 dB range
The W2395 Studio Tone Shaper is a highly flexible three-band equalizer that is well suited for a wide range of creative and corrective applications. The unique combination of the broad stroke Baxandall bands and the parametric filter capabilities provides an extraordinarily effective toolkit for handling any program material. The Baxandall bands were designed to give tonal control of the extremes of the audio spectrum, while the parametric filter allows surgical corrections in the mid band.
The Baxandall tone controls feature fader gain controls offering up to +/- 12 dB of level changes. Due to the circuit design, the high and low bands may influence each other by up to 2 dB depending on the gain setting within each band. Three-position toggle switches allow setting the shoulder frequency of the filter to 45 Hz, 66 Hz, or 90 Hz in the low band, and 1.9 kHz, 3.6 kHz, or 6.3 kHz in the high band.
The semi-parametric mid band filter was taken from Roger Schult's renowned UF1 filter and provides a continuously variable center frequency between 155 Hz and 3.5 kHz with up to +/- 10 dB of gain. A three-position toggle switch allows setting the q-factor of the bell filter to narrow (Q = 1.5), medium (Q = 0.7), and wide (Q = 0.4). The illuminated on-switch allows easy and fast A/B comparisons between the unprocessed original signal and the processed path via noise-free bypass switches.
As all Roger Schult products, the W2395 is hand-crafted and precision-engineered in Germany.
Applications
Easy to use Baxandall shelving filters for high and low frequencies, and a semi-parametric mid band EQ for musical tone control. Ideally suited for recording, mixing, and mastering applications.
Requires a compatible api 500 ® format rack or console for operation.
W2395c Filter Funktionen• Zwei aktive Baxandall-Klangregler für das Höhen- und Tiefenband als Flachbahnregler +/- 12dB• Ein halb parametrisches Mittenbandfilter• Umschaltbarer Frequenzbereich für Höhenband (2K |off | 5K)• Umschaltbarer Frequenzbereich für Tiefenband (80Hz | off | 110Hz)• Mittenbandfilter von 155Hz bis 3500Hz kontinuierlich regelbar, max +/- 10dB• Dreistufiger Kippschalter zur Regelung der Güte des Mittenbandes (1,5 | 0,7 | 0,4)
Der Entzerrer W2395c bietet vielseitige Möglichkeiten zur klanglichen Beeinflussung von unterschiedlichstem Programm-Material. Das Gerät bietet je einen aktiven Baxandall-Klangregler für das Höhen- und Tiefenband sowie ein halb parametrisches Mittenbandfilter.Die beiden Pegelsteller der Baxandall-Klangregler sind als Flachbahnregler ausgelegt und ermöglichen eine Pegeländerung um jeweils +/- 12 dB. Schaltungsbedingt beeinflussen sich das Höhen- und Tiefenband je nach Stellung der Regler um bis zu 4 dB gegenseitig.
Mittels zweier dreistufiger Kippschalter können die Frequenzbereiche von 80 Hz auf 110 Hz bei dem Tiefenband und von 2 kHz auf 5 kHz bei dem Höhenband umgeschaltet werden. In Mittelstellung des jeweiligen Kippschalters kann zur Überprüfung der Wirkungsweise das Filter deaktiviert werden ohne die Pegelsteller zu verändern.Das halb parametrische Mittenbandfilter entspricht der RS Schaltung des UF1 und bietet die Möglichkeit, das Frequenzband zwischen 155 Hz und 3500 Hz kontinuierlich um maximal +/- 10 dB zu bearbeiten. Die Güte des Mittenbandfilters kann über einen dreistufigen Kippschalter von schmal (Q-Faktor 1,5) auf mittel (Q-Faktor 0,7) oder breit (Q-Faktor 0,4) eingestellt werden.Ein Bypass führt das Eingangssignal unter Umgehung aller Filter direkt auf den Ausgang.ApplikationenEinfach zu bedienende Filter zur Eingrenzung des Frequenzbandes, Entfernung von Störfrequenzen, Klangbearbeitung mittels zweier Baxandall-Klangregler für hohe und tiefe Frequenzen und einem parametrischen Mittenbandfilter
€479.00*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...