Lindell Audio ”503 Power” is a 3-slot 500 Series compatible Power Supply.
It features 2.4A of Massive P.O.W.E.R!
It’s a perfect match for our 500 Series modules: 6X-500, 7X-500 and PEX-500.
The ”503 Power” features xlr inputs and outputs, it’s a no frills, super easy to use product!
Get started with 500 Series and Lindell ”503 Power” today!
Lindell Audio ”506 Power” is a 6-slot 500 Series compatible Power Supply.
It features 2.4A of Massive P.O.W.E.R!
It’s a perfect match for our 500 Series modules: 6X-500, 7X-500 and PEX-500.
The ”506 Power” features xlr inputs and outputs, it’s a no frills, super easy to use product! Get started with 500 Series and Lindell ”506 Power” today!
An overpowered 5 amp beast to power your 500 Series modules! * 19" Rack Mount for 10 500-series modules * 5 Amps of power * Internal Power Supply * 90-260 Volt Operation * Removable rack ears * Over Load Protection * Short circuit Protection * Output Voltage Protection
The Six X Five Hundred is a one channel transformer coupled Microphone Preamplifier and Passive 2 Band Pultec Equalizer. It’s an all discrete design based upon the great 990 amplifier.The Equalizer is our take on the magical classic Pultec design. It’s got 15db boost of the creamiest high end you’ve ever heard and the most punchy low end heard the 21th Century.The Sound can be described as ”Fast” ”Punchy” and ”In ya face”. The 6X-500 fits in all 500 series compatible power supplys.
Transformer coupled Balanced inputs and Balanced OutputsUp to 65db of GainPassive Pultec Equalizer. Inductor + 990 gain make-up amplifier3 Step Switched Eq Low Freq Boost 30Hz, 60Hz, 100Hz +/-10%3 Step Switched Eq High Freq Bosst 6kHz, 10kHz, 16kHz +/-10%Selectable High Boost Bandwidth on pcbPolarity ReversePin Compatible with 990&2520 type op-amps48V Phantom Power5-LED VU Meters
The 6X-500VIN "Vintage Edition" juices your 500 Series rack with a single-channel transformer-coupled mic preamp along with a passive 2-band Pultec-style equalizer. This all-discrete design, based upon the highly respected Vintage 1731 amplifier, gives you an EQ section with the magical sound of a classic Pultec. With a 15db boost of the silkiest high end you'll ever hear and stunningly punchy low end, you'll wonder how Lindell managed to stuff a Pultec into this little module. Arm your studio with the fast, in-your-face sound of the delightful 6X-500VIN.
Features:
Transformer coupled Balanced inputs and Balanced Outputs
Up to 65db Gain
Passive Pultec Equalizer. Inductor + 990 gain make-up amplifier
3 Step Switched Eq Low Freq Boost 30Hz, 60Hz, 100Hz +/-10%
3 Step Switched Eq High Freq Bosst 6kHz, 10kHz, 16kHz +/-10%
Selectable High Boost Bandwidth on PCB
Polarity Reverse
Pin Compatible with 990 & 2520 type op-amps
48V Phantom Power
All discrete Vintage OPA1731
5-LED VU Meters
Gold Plated PCB
Functioning as an updated stereo version of our 7X-500 compressor and geared toward mix and drum buss duties, the 77X-500 500 Series Stereo Compressor provides the same 1176-style compression as its mono counterpart in linked or unlinked stereo modes. Additionally, it gives you variable attack and release knobs. Like the 7X-500, it provides 3 selectable ratios and a high-pass sidechain filter that assure your bass frequencies will pass through the compressor unchanged. A wet/dry knob allows for parallel-style compression, while gain reduction metering is provided via dual LED arrays. All of the unit’s FET transistors are matched for stereo control.
FET Style Compressor
Variable Mix Control For Precise Parallel Compression
Variable Attack Times. 20 microseconds to 800 microseconds
Variable Release Times. 50 milliseconds to 1.1 seconds
3 Step Switched High Pass Sidechain Filter. Off, 100Hz, 200Hz
3 Step Switched Ratio 4:1, 12:1, 100:1 (all in)
True Hardware Bypass
4x Vintage OPA1731
Transformers Balanced Outputs
20-LED Gain Reduction Meters
Gold Plated Pcb
Honey- we shrunk the compressor….The Seven X Five Hundred is a one channel compressor/limiter. It’s a FET (field effect transistor) design that incorporate some new and exclusive features such as ”High Pass Sidechain Filter”, ”Mix Knob” mix between dry and wet signal (parallel compression).The 7X-500 is our take on the classic ”1176 Sound”. It can be smooth or it can be a rock’n'roll monster when using ratio 100:1 (all in). FET Style CompressorVariable Mix Control For Precise Parallel Compression3 Step Switched Attack Times3 Step Switched Release Times3 Step Switched High Pass Sidechain Filter. Off, 100Hz, 300Hz3 Step Swithched Ratio 4:1, 12:1, 100:1 (all in)True Hardware BypassTransformers Balanced Ouput20-LED Gain Reduction Meter
The 7X-500VIN "Vintage Edition" compressor packages the sound of one of the most popular compressors of all time into a convenient and remarkably affordable API 500 Series rack module. This late '60s-style FET compressor/limiter may be small, but it still manages to pack all of the useful functionality you could ask for inside. There's a a highpass sidechain filter in the 7X-500VIN, which lets you focus its response, and a mix knob lets you blend its wet and dry signals to taste. Overall, the 7X-500VIN is an amazing compressor for the money.
7X-500VIN Compressor at a Glance:
Simple controls make dialing in the perfect compression easy
Mix control lets you crush your sound, without losing definition
Highpass sidechain filter allows you to fine-tune your dynamics
Dual Vintage OPA amplifiers
Simple controls make dialing in the perfect compression easy Ever try to dial in compression and get immediately slammed with option anxiety? "Did that attack sound better a 20ms or 25ms?" It's a serious issue that can trip you up and ruin your workflow. Lindell gets around this problem elegantly with the 7X-500VIN, without robbing you of effective dynamics control. Instead of burdening you with knobs, you set the 7X-500VIN's attack, release, and ratio with simple yet effective 3-way switches. Wether you're trying to punch up a bass track or mellow out some vocals, the Lindell 7X-500VIN is the right tool for the job.
Mix control lets you crush your sound, without losing definition
Here's another common scenario: you're trying to get an absolutely MASSIVE kick sound, so you crush the living snot out of that track, and just when you've giving it all the umph you need, you realize that the transient from the beater's completely buried in the mix. Normally, that's when you give a profound sigh, zero out your compressor, and start over from scratch. 7X-500VIN compressor saves you that frustration with its mix control, allowing you to beef up your compression and the blend in the dry signal to bring back some of the original dynamics. So go ahead, set your 7X-500VIN to its 100:1 "all-in" mode and abuse your tracks. The mix function always brings you back to golden.
Highpass sidechain filter allows you to fine-tune your dynamics
Want to compress your snare sound, but the kick keeps pushing you over the threshold? No worries - the 7X-500VIN compressor's onboard highpass sidechain filter is ready to come to the rescue. With three settings to choose from (off, 100Hz, and 300Hz) it's easy to block out lows and reclaim your dynamics control. And best of all, you get all the benefits of sidechaining, without needing to patch external signal into your 7X-500VIN.
7X-500VIN 500 Series Rack Compressor Features:
A powerful, affordable, and musical 500 Series format compressor
FET-based technology sounds eerily reminiscent of classic compressors from the late '60s
Variable mix control lets you blend compressed and uncompressed signal in parallel for maximum compression without losing transients
3-step switched attack and release times make dialing in the perfect dynamics easy
3-mode (off, 100Hz, and 300Hz) highpass sidechain filter lets you focus your dynamics
Choose from mild 4:1, heavy 12:1, and "all-in" 100:1 compression ratios
True-bypass hardware preserves your sound when bypassed
20-LED gain-reduction metering lets you keep an eye on the mix
2x Vintage OPA1731
Tobias Lindell hat in Form seines LiN76 bereits den legendären FET-Kompressor erfolgreich modernisiert. Jetzt hat er sich den wohl berühmtesten optischen Röhrenkompressor vorgenommen – das Ergebnis ist der LiN2A. Das einfache Bedienkonzept des LiN2A täuscht über seine Vielseitigkeit hinweg: Die 2A-Kompression verzichtet auf die konventionellen Ratio-, Attack- und Release-Regler anderer Kompressoren und bietet stattdessen eine einfache Zwei-Knopf-Oberfläche mit programmabhängigem Ansprechverhalten für schnelle Ergebnisse.
2A-Style Röhrenkompressor
Hochwertige Bauteile und Cinemag-Übertrager aus US-Fertigung
Kommt mit hochwertigem Black Lion Audio T4BLA Opto-Element
Orientiert sich optisch & technisch am Vorbild
Regelmodi schaltbar zwischen Kompression und Limiting
Große & hochwertige Regler für Gain und Peak Reduction
Kalibrierbares VU-Meter mit Auskunft über Gain Reduction und Output
Programmabhängige Ratio wie beim Original
Höhe-Breite-Tiefe (in mm): 88(2U)-438(19‘)-250
Gewicht: 3,7kg
Tobias Lindell hat bereits mit seinen Modulen im 500er-Format bewiesen, dass er klassische Schaltungen clever in die Moderne überführen kann. Mit dem LiN76 wendet er dieses Talent auf einen berühmten FET-Kompressor an. Lindell Audio präsentiert mit dem LiN76 einen FET-Kompressor mit klassischem Sound. Der LiN76 ermöglicht das Regeln von Input, Output, Attack, Release sowie schaltbarer Ratio Dynamikkontrolle mit Vintage-Klang. Das große VU-Meter kann mit einem rückseitigen Regler kalibriert werden. Wie das Vorbild bietet auch der LiN76 den „All-Buttons-In“-Modus, der den Kompressor in einen Brickwall-Limiter mit besonders aggressivem Sound verwandelt.
Hochwertige Bauteile und Übertrager aus US-Fertigung.
Orientiert sich optisch & technisch am Vorbild.
Aber mit modernen Bauteilen und aktualisierten Schaltungen.
Große & hochwertige Regler für Input und Output.
Kalibrierbares Vu-Meter mit Auskunft über Pegel oder Gain Reduction.
Kompressionsverhältnis 4:1, 8:1, 12:1, 20:1.
„All Buttons in Mode“ auch möglich.
Attack: Frei einstellbar 20uS bis 800uS
Release: Frei einstellbar 50mS bis 1200mS
Höhe-Breite-Tiefe (in mm): 88(2U)-438(19‘)-250
Gewicht: 8kg
Lindell Audio LiNTEC – a fresh new take on the classic Pultec EQ. Every signal benefits from the LiNTEC's excellent warm sound, from silky highs to an outstanding low-end. The solid-state design responsible for this also ensures lower noise and faster transients. The stepped pots and a vintage VU-Meter guarantee an easy workflow. Thanks to the adjustable output level and the low production tolerances, the stereo operation of two devices is working smoothly. The famous low-end trick is of course also on board.Features:Fresh new take on the classic Pultec EQ Solid-state design for faster transients and lower noiseAdd warmth and harmonic content to any track Stepped pots and switches for easy recallAdjustable output level for stereo operationCustom-made transformersOPA 1731 op-amp Vintage-style VU Balanced TRS Input and OutputDimensions: 438 mm x 488 mm x 250 mm (W x H x D)
Feature:
Based on Pultec EQP1a
Extended high frequency range. 1K, 1,5K, 2K, 3K, 4K, 5K, 8K, 10K, 12K, 14K, 16K
Extended low frequency range. 20Hz, 30Hz, 60Hz, 100Hz, 150Hz
Transformer balanced output
Designed around vintage 1731 opamp
Hand-wound inductor
All switched rotary controls
Gold-plated PCB internals
Real hardware bypass
Compatible with 500 series racks
Feature:
500 Series equalizer modeled after Pultec's legendary passive EQ design
Compatible with all standard API 500 Series compliant racks
All discrete design based upon the legendary Vintage OPA1731 amplifier for classic EQ sound
Transformer coupled balanced inputs and balanced outputs provide pristine clarity
3-step switched low frequency boost 30Hz, 60Hz, 100Hz +/-10%
3-step switched high frequency boost 6kHz, 10kHz, 16kHz +/-10%
3-step switched high frequency attenuation 10kHz, 15kHz, 20kHz +/-10%
True bypass hardware preserves your sound quality when bypassed
The PEX Five Hundred is a one channel transformer coupled Passive Pultec Equalizer. It’s an all discrete design based upon the great 990 amplifier.The Equalizer is our take on the magical classic Pultec design. It’s got 15db boost of the creamiest high end you’ve ever heard and the most punchy low end heard in the 21th Century.The PEX-500 fits in all 500 series compatible power supplies.
Transformer coupled Balanced inputs and Balanced OutputsPassive Pultec Equalizer. Inductor990 Discrete gain make-up amplifier3 Step Switched Eq Low Freq Boost 30Hz, 60Hz, 100Hz +/-10%3 Step Switched Eq High Freq Bosst 6kHz, 10kHz, 16kHz +/-10%3 Step Switched Eq High Freq Attenuation 10kHz, 15kHz, 20kHz +/-10%Pin Compatible with 990&2520 type op-ampsTrue Hardwire Eq Bypass
Basierend auf seinen hochgeschätzten analogen 500er Einschubmodulen präsentiert der schwedische Hersteller Lindell Audio mit Track-Pack einen kompakten Channel-Strip für höchste Ansprüche. Track-Pack kombiniert den diskret aufgebauten 6X-500 Mikrofonvorverstärker mit dem flexiblen 7X-500 FET-Kompressor in einem leistungsfähigen, kompakten 503 Power Modulträger. Das Track-Pack von Lindell Audio bringt den analogen Sound geliebter Studioklassiker in ein kompaktes Format und eignet sich damit sowohl für kleinere Projektstudios als auch für Profis, die sich auch mobil stets auf ihren hochwertigen Channel-Strip verlassen können müssen.
Basierend auf seinen hochgeschätzten analogen 500er Einschubmodulen präsentiert der schwedische Hersteller Lindell Audio mit Track-Pack und Track-Pack Deluxe zwei kompakte Channel-Strips für höchste Ansprüche. Track-Pack kombiniert den diskret aufgebauten 6X-500 Mikrofonvorverstärker mit dem flexiblen 7X-500 FET-Kompressor in einem leistungsfähigen, kompakten Modulträger. Track-Pack Deluxe ergänzt den PEX-500 Pultec Style Equalizer, der mit seiner klassischen Parametrisierung eine flexible Klangformung mit samtigen Höhen und druckvollen Bässen ermöglicht. Beide Channel-Strips greifen auf den Einschubrahmen 503 Power zurück, der genug Strom auch für anspruchsvollere Module liefert und damit beste Arbeitsbedingungen für die klangstarken analogen Module bietet.
Feature:
Microphone input with over 65db of gain
Transformers made in England by Carnhill Group Ltd
VCA compressor with Threshold, auto gain make-up, Gain, Mix knob for instant parallel compression. Linkable
Compressor features the EED circuit
3-Band equalizer with High 10kHz cut/boost +/- 10db. Sweepable mid band 900 - 5kHz +/- 10db. Low 100Hz cut/boost +/- 10db
60 m.m high quality fader
48V Phantom power
Polarity reverse switch
€1,259.00*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...