Two of them in one 19" case:
The Electrodyne 501 is a two stage discrete transistor, transformer coupled preamp with active DI, using classic 1969 / 1970 design technology. Each amp stage is individually optimized for peak performance using Electrodyne factory engineering notes and selected high performance components identical to the originals. The transformers are made by Electrodyne’s original manufacturer to exacting factory specifications. The active DI circuit presents an almost immeasurable load to sensitive musical instrument outputs allowing incredibly accurate capture of the instruments true tone. The output of the DI circuit is designed to directly connect and interact with the mic input transformer to allow maximum tone options.
Two of them in one 19" case:
The Electrodyne 501 is a two stage discrete transistor, transformer coupled preamp with active DI, using classic 1969 / 1970 design technology. Each amp stage is individually optimized for peak performance using Electrodyne factory engineering notes and selected high performance components identical to the originals. The transformers are made by Electrodyne’s original manufacturer to exacting factory specifications. The active DI circuit presents an almost immeasurable load to sensitive musical instrument outputs allowing incredibly accurate capture of the instruments true tone. The output of the DI circuit is designed to directly connect and interact with the mic input transformer to allow maximum tone options.
Two of them in one 19" case:
Electrodyne 511 two-band inductor EQ: The Electrodyne 511 is a classic two-band discrete transistor reciprocal active inductor equalizer using 1969 / 1970 design technology. The custom inductors and output transformer are made by Electrodyne’s original maker, to strict factory manufacturing tolerances as small as 2%. This allows consistent eq performance and repeatability from channel to channel that was not possible in the 60,s. Smooth performance and eq response from minimum to maximum gain at all frequencies, provides unusually broad sonic and tonal options not experienced since the 1970,s.
The Electrodyne 501 is a two stage discrete transistor, transformer coupled preamp with active DI, using classic (1969? / 1970?) design technology. Each amp stage is individually optimized for peak performance using Electrodyne factory engineering notes and selected high performance components identical to the originals. The transformers are made by Electrodyne’s original manufacturer to exacting factory specifications. The active DI circuit presents an almost immeasurable load to sensitive musical instrument outputs allowing incredibly accurate capture of the instruments true tone. The output of the DI circuit is designed to directly connect and interact with the mic input transformer to allow maximum tone options. SpecificationsMaximum Gain: 68db. Adjustable over 50db in 2db steps with two ranges using 20db pad.Output level control: Infinitely adjustable from 0 (off) to +6db over unity.Input impedance: Microphone, 50 / 200 ohms selectable. DI, over 7 megohms.Output impedance: 150 ohmsDistortion: 0.02%typical over entire gain range.Maximum output: +30db at less than 0.8%thd. (+29.5db at 0.06%thd)Frequency response: +/- 0.25db, 10hz to 60khz.Signal to noise: -80db typ, -60db at absolute maximum gain.Clip indicator: Monitors all three amp stages and illuminates when any stage is 3db from clip.
The Electrodyne 501 is a two stage discrete transistor, transformer coupled preamp with active DI, using classic (1969? / 1970?) design technology. Each amp stage is individually optimized for peak performance using Electrodyne factory engineering notes and selected high performance components identical to the originals. The transformers are made by Electrodyne’s original manufacturer to exacting factory specifications. The active DI circuit presents an almost immeasurable load to sensitive musical instrument outputs allowing incredibly accurate capture of the instruments true tone. The output of the DI circuit is designed to directly connect and interact with the mic input transformer to allow maximum tone options. SpecificationsMaximum Gain: 68db. Adjustable over 50db in 2db steps with two ranges using 20db pad.Output level control: Infinitely adjustable from 0 (off) to +6db over unity.Input impedance: Microphone, 50 / 200 ohms selectable. DI, over 7 megohms.Output impedance: 150 ohmsDistortion: 0.02%typical over entire gain range.Maximum output: +30db at less than 0.8%thd. (+29.5db at 0.06%thd)Frequency response: +/- 0.25db, 10hz to 60khz.Signal to noise: -80db typ, -60db at absolute maximum gain.Clip indicator: Monitors all three amp stages and illuminates when any stage is 3db from clip.
The Electrodyne 511 is a classic two-band discrete transistor reciprocal active inductor equalizer using (1969? / 1970?) design technology. The custom inductors and output transformer are made by Electrodyne’s original maker, to strict factory manufacturing tolerances as small as 2%. This allows consistent eq performance and repeatability from channel to channel that was not possible in the 60's. Smooth performance and eq response from minimum to maximum gain at all frequencies, provides unusually broad sonic and tonal options not experienced since the 1970's. SpecificationsInput: Active balanced discrete transistor impedance converter.Output impedance: 150 ohms+/-12 db gain range: Equalize or Attenuate4 frequencies selectable per band. LF: 40, 100, 250, 500hz. HF: 1.5k, 3k, 5k, 10k.Peak/Shelf function on each band. Shelving at all frequencies, Peaking at 250, 500, 1.5k, 3k and 5k.Distortion: 0.03%typical.Maximum output: +30db at less than 0.8%thd. (+29.5db at 0.06%thd)Frequency response: +/- 0.25db, 10hz to 70khz typical.Signal to noise: -85db typ.
The Electrodyne 511 is a classic two-band discrete transistor reciprocal active inductor equalizer using (1969? / 1970?) design technology. The custom inductors and output transformer are made by Electrodyne’s original maker, to strict factory manufacturing tolerances as small as 2%. This allows consistent eq performance and repeatability from channel to channel that was not possible in the 60's. Smooth performance and eq response from minimum to maximum gain at all frequencies, provides unusually broad sonic and tonal options not experienced since the 1970's. SpecificationsInput: Active balanced discrete transistor impedance converter.Output impedance: 150 ohms+/-12 db gain range: Equalize or Attenuate4 frequencies selectable per band. LF: 40, 100, 250, 500hz. HF: 1.5k, 3k, 5k, 10k.Peak/Shelf function on each band. Shelving at all frequencies, Peaking at 250, 500, 1.5k, 3k and 5k.Distortion: 0.03%typical.Maximum output: +30db at less than 0.8%thd. (+29.5db at 0.06%thd)Frequency response: +/- 0.25db, 10hz to 70khz typical.Signal to noise: -85db typ.
The Electrodyne Audio Summing Station is an active 16-channel summing mixer with stereo insert inspired by 1970’s large format console summing and stereo buss.
The Electrodyne Audio Summing Station uses an active circuit design with balanced outputs and stereo insert path. It uses transformers originally designed by Electrodyne and discerete transistor op-amps throughout. A transformer control offers a choice between “Tight” and “Warm” character.
In addition, the Summing Station provides a high quality control room monitor section with Stereo Mix, Artist Cue, XLR and 1/8” mobile device inputs. It also boasts Main and Alt monitor selector to let you select a second pair of reference monitors as well as a high-quaility headphone amplifier with extremely low distortion balanced signal path.
Analogue and Digital cue input section can be routed to headphone or studio monitor mix while a Talkback mic with control room monitor dim function . A “Control Room Listen” function lets the artist hear control toom sources for playback and rehearsal activities.
€3,399.00*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...