Schoeps CCM 2 L
Produktinformationen "Schoeps CCM 2 L"
- Omnidirectional
- linear frequency response
- corrected for the direct sound field
- for use close to the sound source (frontal sound incidence)
- preferred applications: close pickup of singers and instruments
As can be seen from the frequency response curve, this microphone type has flat frequency response for frontal sound incidence. This yields a very natural quality when picking up sound that is predominantly direct, i.e. close to the source or in a ”dry” acoustic.
The CCM 2 is meant to be placed in close proximity to the sound source. The sonic impression never becomes overly brilliant or harsh. Please note that there is some directivity at high frequencies due to the physics of sound. Thus even with an omnidirectional microphone, it still matters which way the capsule is “aimed.”
Frequency range
see corresponding capsule
---
Sensitivity
see corresponding capsule
---
Maximum sound pressure level (THD < 0.5 %)
135 dB-SPL (P48)
127 dB-SPL (P12)
---
Maximum output voltage
2,6 V (8,3 dbV) with 2 kΩ load
---
Low cut filter
20 Hz, 12 dB/Okt.
---
Output impedance
90 Ω @ 1 kHz
---
Maximum cable length
> 400 m
---
SCHOEPS RFI Shield
No
---
Powering standard / Valid range
P48 / > 40 V
P12 / > 10 V
---
Current consumption
4 mA (P48)
3,6 mA (P12)
---
Common mode rejection ratio (at 1 kHz)
> 55 dB
---
Minimum recommended load impedance
2 kΩ
---
Output
Lemo (CCM-L) or XLR-3M (CCM-U),
analog, 1 channel
---
Length
46 mm (CCM-L)
---
Diameter
20 mm
---
Weight
33 g (CCM-L)
---
Surface finish
matte gray (g)
or custom color
see corresponding capsule
---
Sensitivity
see corresponding capsule
---
Maximum sound pressure level (THD < 0.5 %)
135 dB-SPL (P48)
127 dB-SPL (P12)
---
Maximum output voltage
2,6 V (8,3 dbV) with 2 kΩ load
---
Low cut filter
20 Hz, 12 dB/Okt.
---
Output impedance
90 Ω @ 1 kHz
---
Maximum cable length
> 400 m
---
SCHOEPS RFI Shield
No
---
Powering standard / Valid range
P48 / > 40 V
P12 / > 10 V
---
Current consumption
4 mA (P48)
3,6 mA (P12)
---
Common mode rejection ratio (at 1 kHz)
> 55 dB
---
Minimum recommended load impedance
2 kΩ
---
Output
Lemo (CCM-L) or XLR-3M (CCM-U),
analog, 1 channel
---
Length
46 mm (CCM-L)
---
Diameter
20 mm
---
Weight
33 g (CCM-L)
---
Surface finish
matte gray (g)
or custom color